Thailand
Get to know groundwater
Currently, groundwater may not be used much as the area of water supply has now expanded widely, making it easy for most people to have access to water. However, places outside the service area of the waterworks will have to find a way to supply water to use. The method that is popular and still in use today is the use of groundwater. The groundwater is water that is not less than 10 meters below the surface. In some areas there is no groundwater due to unfavorable conditions. Groundwater is generally clean because it is deep underground, free from chemicals or impurities like surface water. Iron rust is mostly found in well- water and is often of a quality that is not fully usable or unsuitable. Due to the high content of iron solution, iron rust makes it impossible to consume. The resulting water is brusque (There is a solution of calcium and magnesium salts in the water, when laundered with soap it forms a precipitate called soap sludge in which sometimes little or no bubbles form.) It cannot be used for effective washing. These are problems that groundwater users often encounter on a regular basis.
Therefore, in order to bring groundwater for consumption, it is necessary to have a procedure to remove the contaminants in the water first so that the water can be used to its fullest and does not adversely affect the user, for example: Iron and manganese removal, asperity removal and disinfection, etc.
Today, there are many ways that we can remove iron rust and contaminants from groundwater, so we can use for consumption such as
Precipitation of water with aeration
It is a method of improving water quality by using air to spray into the well, but often encounters the problem of not being able to precipitate the iron solution in the water completely, and the used sedimentation ponds are often too small and therefore unable to separate the sediment out of a layer of clear water layer, so when that water goes through the filtration process, it will quickly clog the filter system and affect the whole system.
Filtering the iron solution with filter sand to remove iron rust
It is a direct filtration through sand filtering water, but the main problem found regularly is that the water that passes through this sand filter still has iron solution remaining, causing the filter system to become clogged quickly, needing time to take care of the filter system and the resulting water cannot be used in many ways.
But now it is easier and more efficient to remove iron rust or iron solution in groundwater due to the development of glass filters. Which has the ability to filter heavy metals such as manganese, chromium, phosphate, arsenic, as well as iron rust. The filter media is AFM® (Activated Filter Media), a glass-based water filter media that can easily filter heavy metals and capture solutions that float in water.
Filtering the iron solution with filter sand to remove iron rust
It is a direct filtration through sand filtering water, but the main problem found regularly is that the water that passes through this sand filter still has iron solution remaining, causing the filter system to become clogged quickly, needing time to take care of the filter system and the resulting water cannot be used in many ways.
But now it is easier and more efficient to remove iron rust or iron solution in groundwater due to the development of glass filters. Which has the ability to filter heavy metals such as manganese, chromium, phosphate, arsenic, as well as iron rust. The filter media is AFM® (Activated Filter Media), a glass-based water filter media that can easily filter heavy metals and capture solutions that float in water.
8 things need to know about groundwater source
I believe that everyone is familiar with “groundwater” before. Groundwater is very useful both in the household sector, industrial sector and agriculture especially in areas that are far from water resources or arid areas drilling for groundwater from underground. Helps to meet the needs of water as well. whether for consumption or consumption, as everyone knows, groundwater has many benefits, but today Glass Filter Media will talk about the disadvantages of groundwater. Because although groundwater has many uses and yet and let’s see how well the groundwater and what are the disadvantages?
Disadvantages of groundwater
1: Iron rust
Iron rust problems are common in groundwater. It affects the quality of water causes it unclean, unsafe for the health of those who use it for consumption. Therefore, before using groundwater, iron rust must be removed first, such as filtering the iron solution with glass filter or sand filter, or precipitating water with aeration.
2: Contamination of sewage or chemicals
If in the vicinity of groundwater drilling there are animal husbandry, livestock farms, as well as waste pits or pesticides are used, the groundwater may be contaminated with sewage or contaminated with chemicals, toxic agents. Because sewage or chemicals will seep into the basement, especially aquifers, there are no boundaries. Thus, causing contamination in groundwater itself. The invisible dangers of these toxic contaminants have a huge impact on long-term health. The mortality rate of consuming contaminated water, according to the survey results of cancer from the consumption of contaminated water, ranks among the top of the survey.
3: Fluorite values exceed the standard
If groundwater contains fluorite above the standard, it will affect both the household. The industrial sector includes the agricultural sector, especially the industrial sector as it may damage raw materials and making the production process inefficient. The quality of the product has deteriorated especially in the food industry. Therefore, before the use of groundwater, it is necessary to treat groundwater by making a groundwater filtration system first. for safe use
4: Mixing of paving stones
Groundwater can sometimes have a foul or unpleasant odor that occurs naturally by contaminating soil, rocks, gravel or mud, however this problem can be solved by installing a water filtration system by Use a quality underground water filter that meets international standards.
5: Corrosion
6: High Cost of Drilling
7-8: High cost of drilling and installation of groundwater filtration
The drilling and pumping of groundwater required the installation of a water filter. To get clean groundwater without chemicals or contaminants because if groundwater is not clean when used for consumption or consumption, it will affect the health of the body, but drilling and installing water filters Groundwater can be costly, and although they are costly in the early stages, they can definitely pay off in the long run. It also makes the groundwater that is clean and safe for the health of the body as well.
All in all, the disadvantages of groundwater, most often the problem with groundwater is the contamination of chemicals, sewage, plant remains, animal carcasses or toxic minerals such as iron rust as well as unpleasant odors. For various purposes, many of these problems can be solved by installing a groundwater filtration system to ensure clean and safe use of groundwater, without adversely affecting the health and body of water users. But only to install a water filtration system of good quality and standard.
The process of contaminating various toxins into groundwater, even though rocks, sand layers, and soil layers, but these layers, rocks, sand are still unable to filter out all of these deadly toxins.
Therefore, Glass Filter Media invites you to try AFM glass filter media, which can help you reduce the above problems from artesian well water by up to 95 percent for health and good quality of life. Try AFM glass filter media. If you want to know more about what to use in your groundwater filtration system, you can call us for free. Happy to serve you