Process of pouring glass filter AFM®

Calculation of the amount of glass filter media in use and the process of pouring glass filter media

Process of pouring glass filter media in the filter tank, specify the size of the water filter tank (details are on the side of the filter tank).
Calculation of the amount of glass filter media in use
Filters better than sand.
How to use the AFM® glass filter? Pour the filter.
After calculating the glass filter substance The amount of filter media has already been obtained.

  1. Determine the size of the water filter tank (details are normally on the side of the filter tank)
  2. Fill in AFM® filter into the tank (pour in the smallest size of AFM® grade first then follow with the bigger grade e.g. – 1ng then 2ng then No. 3 (if required)).
  3. Pumping water into the tank, that’s it, your water tank is ready to be used

How much glass filter media is required ?

You just need to fill in the size of the filter tank. (Diameter and height which is indicated on the tank), Our system will automatically calculate the required amount of AFM® filter.
AFM® glass filter media lasts longer (15 years) compared to sand and its usage quantity is less than sand (AFM® uses only 80% of sand)

sand

Process of pouring glass filter media in a filter tank of 800 mm.

tank size < 800 mm.

filter tank

Filter tanks with a diameter of less than 800 mm or 80 cm.

Features of AFM® new generation glass filter media

AFM® 1 ng : 50%

0.4 – 0.8 mm.

Features of AFM® new generation glass filter media

AFM® 2 ng : 50%

0.4 – 0.8 mm.

* New AFM® 2 NG ratio will help support foundation. It also serves as a filter as well.

tank size > 800 mm.

Filter tank

Filter tanks with a diameter greater than 800 mm or 80 cm .

Features of AFM® new generation glass filter media

AFM® 1 ng : 50%

0.4 – 0.8 mm.

Features of AFM® new generation glass filter media

AFM® 2 ng : 30%

0.7 – 2.0 mm.

AFM® 3 : 20%

0.7 – 2.0 mm.

l

If the filter tank has a size Diameter 70 cm or more AFM® No. 3 filter is required.

Contact us

Is your filtering system optimized?

Comparison table of AFM® NG glass filter media and sand

Process of pouring glass filter, Sand

AFM® NG

  • Default filter efficiency : 1 Micron
  • Filter lifetime : 15 Years
  • Time to wash the glass filter : 2 Minute
  • Not born biofilm
  • Smells less chlorine
Process of pouring glass filter, Sand

Sand

  • Default filter efficiency : 30-40 Microns
  • Filter lifetime : 1-2 Years
  • Time to wash the glass filter : 10 Minute
  • A lot of biofilm
  • Smell of chlorine

AFM® glass filters are more efficient than sand

Can be used for … ?

  • Filter drinking water
  • Wastewater treatment system
  • Used in swimming pool systems
  • Heavy metal removal
  • UF/RO/SWRO system
  • AFM® glass filter has increased water filtration efficiency, can filter up to 1 micron.
  • AFM® glass filtrate with a service life of 15 years
  • AFM® glass filtration takes 2-5 minutes to backwash.
  • AFM® glass filter features filtration of sediment, heavy metals, microplastics.
  • AFM® glass filter media does not lead to biofilm formation.
  • AFM® glass filter media When used for filtration, the system’s chemical consumption is reduced by up to 50%.
  • With all the features of AFM® glass filters, it is evident that its properties and performance are excellent.
  • Can replace sand, manganese, anthracite