Description
RO Booster Pump :
- It is a Diaphragm type water pump that acts mainly as an RO Booster Pump (water delivery pump into the RO Membrane filter) able to provide a good water flow rate according to the size of the membrane. Suitable for use in the household Small shopping malls with a high demand for water or buildings that are 2-3 stories high from the floor
- Our booster pumps can be used with high-pressure R.O. 400 GPD membrane filters.
- Product complete set with Adapter 220 V converted to 24 VDC 3.0 A
- This pump is capable of continuous and efficient operation for follow-up circulation applications as well.
- Ideal to work with hydraulic storage systems but also compatible with most hydraulic shut-off valves. This booster is suitable for 400 GPD water purifiers and reverse osmosis systems.
Instructions for use:
- Requires proper power adapter
- The pump is prohibited from being directly through the raw water without pre-filtering, otherwise it will affect its service life.
- Pumping of corrosive liquids, alcohol, acid-base liquids, etc.
- The wiring is not divided into the positive and negative poles, and two wires can be connected at will.
- When installed inside the water purifier, tighten the screws to avoid resonance noise and try to keep enough for the heat dissipation pump.
- The pump should not run continuously for more than 4 hours. stop for 30 minutes for more than 4 hours
- The pump is not available for irrigation, solar, bathing, or pressure water heaters.
- Size 400 GPD
- Standard booster pump
- Use the water pump to enter the filter tank.
- Made of good quality stainless steel and the material on the pump body is high quality plastic. Resistant to heat, strong, meets the standards through the test of use.